Ball Valves

Ball Valves are of soft seated, Floating Ball, 3 piece design available in both Regular port & Full Port patterns. Ball is seat supported and quarter turn rotates the ball from full open to full close position.
The stem flange, and integral part of the stem, prevents the stem from blowing out from pressure within the body cavity. This feature also allows replacement of stem packing while the valve is under pressure.
One of the most important component in any Ball valve is the Ball itself. The Ball is accurately machined to mirror finish and the exact sphericity to ensure low operation torque and high pressure holding capacity and thus increasing life of the valve.

Optional Features :

* Single piece & two piece design Ball valves. in full port & regular port.
* Jacketed construction.
* Hard Crome plated Balls.
* Extra long extended Ball Valves.

MATERIALS OF CONSTRUCTION
		WCB	CF8	CF8M
1.	BODY	WCB	CF8	CFCF8M
2	END CONNECTION	WCB	CF8	CF8M
3.	BALL	CF8	CF8	CF8M
4.	SEAT	P.T.F.E	P.T.F.E	P.T.F.E
5.	STEM	SS410	SS304	SS316
6.	STEM NUT	MS	SS304	SS316
7.	GLAND BUSH	SS410	CF8	CF8M
8.	PACKINGS	P.T.F.E.	P.T.F.E.	P.T.F.E.
9.	BOLTS	A 193-B7	B8	B8M
10.	NUTS	A 194-2H	A 194-8	A 194-8M
11.	LEVER	MS	MS	MS
All valves upto 2" Investment Casted

TEST PRESSURES
TEST	Pr.	150	300	Testing Medium
SHELL	psig	450	1125	Kerosene or Water
SHELL	BAR	30	77
SEAT LEAK	psig	325	835
SEAT LEAK	BAR	22	57

DIMENSIONS
ASA 150 # (inches)
BORE DIA	F TO F	F DIA	F THIC	P.C.D.	RFD	N of H	H DIA
1	5	4 1/4	7/16	3 1/8	2	4	5/8
1 1/2	6 1/2	5	9/16	3 7/8	2 7/8	4	5/8
2	7	6	5/8	4 3/4	3 5/8	4	3/4
2 1/2	7 1/2	7	11/16	5 1/2	4 1/8	4	3/4
3	8	7 1/2	3/4	6	5	4	3/4
4	9	9	15/16	7 1/2	6 3/16	8	3/4
5	10	10	15/16	8 1/2	7 5/16	8	7/8
6	10 1/2	11	1	9 1/2	8 1/2	8	7/8
8	11 1/2	13 1/2	1 1/8	11 3/4	10 5/8	8	7/8

The Specifications an d data in this leaflet are as accurate as possible improvements and modifications from time to time may necessitate change in design and dimensions.

Ball Valve 150

Forged Steel Ball Valves